It is important that you know how long to wait after shocking a hot tub or spa. Using a hot tub too soon after it is shocked can lead to problems, but not with the hot tub itself, problems for hot tub users.
The time that you should wait before you go in a hot tub after giving it a shock treatment differs depending on a number of factors.
It can range in time from 20 minutes and anything up to 24 hours if you gave it a heavy shock using a chlorine-based hot tub shock. That is rather a broad time range so I will be more specific in the rest of the post.
Table of Contents
- Factors that affect how long to wait after shocking a hot tub
- What could happen if you do not wait?
- Hot Tub Maintenance Course
Factors that affect how long to wait after shocking a hot tub
1. Type of shock
The type of shock you use will be the most important factor in deciding how long to wait before you use the hot tub again.
Generally, you will have to wait longer before it is safe to use when using chlorine shock than non-chlorine shock.
Always read the labels of the shock product you have bought. If you are not sure, then either look the product up online or ask a professional.
The most usual type of shock to use with a chlorine hot tub is, unsurprisingly, chlorine. There are two main types of chlorine shock which are:
- dichlor shock (dichloroisocyanuric acid)
- cal hypo (calcium hypochlorite)
Most brands of spa shock contain dichlor and that would be the type I would recommend. Cal hypo is more suitable for shocking swimming pools.
If you have given the hot tub a very strong shock (super chlorinated) due to a problem with the water then you will need to wait longer than if you have just given it a normal weekly dose. It could take as long as 24 hours for the chlorine levels to reduce to safe, normal levels.
You should test the water using a test strip or some other test method to check the chlorine levels before using it. You should wait until the chlorine levels are 3 ppm (parts per million) or less.
In most cases, when using a non-chlorine shock (which is an oxidizer) you can get back in quite quickly, so it is ideal if you test your water before a spa party and realize you need to shock but have little time before the party.
Many non-chlorine shocks act quickly so you can use the hot tub again after as little as 20 minutes.
Bromine hot tubs
In a bromine hot tub, you can use either chlorine based or a non-chlorine oxidizer shock. Personally, I would use a non-chlorine oxidizer once a week.
Recommended shock products
I recommend using SpaGuard Spa Shock or SpaGuard Spa Shock-Oxidizer
2. How dirty the hot tub is
As you can probably imagine, the more you use the hot tub, the dirtier it will get.
Also, not cleaning it or shocking the hot tub for a while will leave more bacteria and other contaminants inside the water. Often you can see this by the color of the water.
The dirtier and more cloudy it is, the more time it will take for it to be thoroughly cleansed by the shock treatment as you will have to put a higher dosage of shock in the water.
The higher the concentration of the shock product, the longer it often takes for the water to stabilize to normal levels again. The normal levels are necessary for your bathing to be safe and healthy.
3. How often you shock your hot tub
The more often you shock the hot tub, the cleaner the water will be.
Therefore, when you do your regular shock routine, using a lot of spa shock in a high concentration will most likely not be necessary.
If you use less spa shock, and at a lower concentration, it will take less time for the water to reach its normal bathing levels.
Read: How often to shock a hot tub
What could happen if you do not wait?
Using a hot tub when the chlorine levels are above 3 ppm can lead to:
- red and sore eyes
- itchy skin
- respiratory problems
Some people are more susceptible to these effects than others. Some bathers may experience itchy skin in a hot tub due to the jets rather than chlorine levels.
At higher chlorine levels (5 ppm or above) it could possibly lead to what is known as chlorine poisoning.
If chlorine levels are kept high for any length of time then too much chlorine can damage a hot tub.
Hot Tub Maintenance Course
I bought Swim University’s Hot Tub Maintenance Course a while after I bought my first hot tub and was struggling with maintaining it. It was money very well spent and it has paid for itself many times over the years as I have saved by not needing to use as many chemicals as I did previously.
EXCLUSIVE OFFER to visitors of this site
Use the discount code EASY10 at checkout to save 10% on this Swim University course.
Can you go in a shocked hot tub?
You should not go in a shocked hot tub until the chlorine levels have reduced to 3 ppm or less otherwise bathers can experience sore eyes and itchy skin.
Is spa shock the same as chlorine?
Spa shock is different from the normal chlorine you use in a hot tub. Spa shock is unstabilized whereas normal chlorine is stabilized. Stabilizer is CYA (cyanuric acid) which prevents chlorine from being used too quickly.
Will shock lower pH in hot tub?
Pool shock will not directly lower the pH in a hot tub but the pH could be altered as a side effect. You should test the pH after the shock has done its job and readjust if necessary.
How many times can I shock my hot tub?
Generally you would only shock a hot tub once per week. If the hot tub is so dirty that after shocking it is still dirty then you would be better advised to empty it and refill.
I have had hot tubs for over 20 years and a pool for the last 9 years. I had to learn how to clean, maintain and fix them the hard way. Since then I have helped many friends and neighbors with their pools and now I want to share everything I have learned with you. About Me